Screen Mesh 101 - For Dummies - Screen Print Direct

Not all screen mesh is the same. The lower the mesh count the more ink will pass through the screen and vice versa. In simpler terms...



low mesh count = more ink on the garment



high mesh count = less ink on the garment



Considerations before choosing a mesh count:



When choosing a mesh count the following are important to consider



1. The type of ink you are using (specialty, plastisol, water-based, UV-ink)



2. Art - Is your art simple? Have fine detail such as a halftone



Making these distinctions before you print will save you time and money on the press. 






Use the mesh guide below to choose the right mesh for your next job. 



40 Mesh - This is not a commonly used mesh size and should be used for specialty inks such as glitters and shimmers. This mesh has large "pores" and will allow ink with larger particles to pass through. Using standard plastisol ink on this size would be very messy because it would allow too much ink to pass through the screen.



Typically anything from 40-86 mesh should be used for specialty inks with larger particles. 



110 Mesh -  This mesh count is good for prints with low detail such as large block text or simple art. It is used to put down heavier ink deposits. Heavier ink deposits are used specifically when printing with an under-base or getting a light color to pop on a dark garment. It is important to note that heavier ink deposits will create a thick layer of ink and not as soft of a hand.



137 Mesh - This is the golden mesh. 137 is the perfect mesh for all your standard plastisol inks. It produces a nice layer of ink with good detail. 



155 Mesh - Similar to 137 but will hold a bit more detail for finer prints. This mesh allows less ink to pass through therefore producing a softer feel.



155 and Up Mesh - is the recommended mesh for Water Based Inks/Discharge Inks



230 Mesh - Use this mesh for your most detailed of prints such as as halftones. While this ink produces an extremely soft hand feel, the ink deposit passed through the screen is very light resulting in less vibrant prints. 



It is important to note that the 230 mesh sold here at Screen Print Direct is yellow. Yellow mesh will increase your exposure time. If you expose with the same time as you would white mesh your screen will be under-exposed. 






We suggest experimenting with different screen meshes. Not all mesh is the same and neither are printers. Do you prefer bolder prints? A softer hand feel? What about your customer, what do they like? Experimenting with different mesh screens will expand your skill set and allow you to offer more to your customers. 



Let's Talk 

Remember, we are here to help! Drop a comment below or email our support team at 




Celso Cortez

Celso Cortez

How can I get a proper mesh count for my project without spend to much money, can you send sample size, and how much would them cost?

Gautam Paul

Gautam Paul

I want to purchase mesh clothe for frame of Screen print.

Leave a comment