Ecotex® Emulsion Remover

For best results follow the steps below.

1. Once you have removed ink from the screen, apply our emulsion remover to both sides of a wet screen. leave for 15-30 seconds.

DISCLAIMER: If left on longer than the recommended time emulsion can lock permanatly on the screen.

2. Rub your screen with a brush or a non abrasive scrub pad to make sure emulsion remover is spread evenly over coated area.

3. Use a high pressure washer and begin washing your screen from the bottom and work your way upward.

You can use Emulsion Remover as is for tough stencils, or you can also dilute it up to 1:4 with water for stripping of easier stencils.