Ecotex ® Red High Viscosity Textile Emulsion

Application:Apply to clean, degreased and dried screen with a scoop coater. Be sure to use appropriate application techniques. It’s recommended you eliminate any UV light from entering the room and work under a yellow light.

Exposure Times:

Exposure times may vary, start using the times provided below and make adjustments to time if needed. Add an exposure calculator to help dial in expsure times.

• 13 – 15 seconds with LED Light
• 7.5 - 8 minutes with 500w Halogen Light

Drying:

• 86 ° to 104 °F (30 ° to 40 °C)
• 30% to 50% humidity
• Good Air Circulation

Shelf Life & Storage:

• 12 months if not exposed to extreme weather conditions or exposed to light
• Mixed with diazo for water-based Inks: 1 weeks

✔️Pro Tips:

• Prep your screen before coating with Ecotex Hyper Haze
• Eliminate any UV light from entering the room and work under a yellow light.
• Use the sharp edge of your scoop coater
• Make sure screen is completely dry before coating emulsion
• Make sure emulsion is completely dry before printing
• Keep the emulsion lid on tight to preserve air and light leaks
• Gently mix the emulsion each time before use to help extend the life
• Write down the day you opened the emulsion on the bottle to better keep track of your chemicals.
• Keep in a cool area, emulsion will break down much faster in heat. Keeping emulsion in a fridge can help to give a slightly extended shelf life, however, emulsion that has gotten to the point of freezing will no longer work properly and must be replaced