TEX-RED HV – HIGH VISCOSITY PHOTOPOLYMER EMULSION

5


Ecotex TEX-RED HV is an amazing High Viscosity Textile Pure Photopolymer Emulsion. This products High Viscosity yields better coating, sharp edges, & excellent resolution. It is pre-sensitized and ready for use. Works with Plastisol ink systems. Apply to clean, degreased, dried screen with a scoop coater. Be sure to use appropriate application techniques. Reclaiming Ecotex TEX-RED HV is easy with Ecotex Emulsion Remover. 

Helpful Hints to Ensure Your Emulsion Lasts Longer Once Mixed:

  • Keep in a cool area, emulsion will break down much faster in heat. Keeping emulsion in a fridge can help to give a slightly extended shelf life, however, emulsion that has gotten to the point of freezing will no longer work properly and must be replaced.
  • Keep the emulsion lid on tight to preserve air and light leaks.
  • Gently mix the emulsion each time before use to help extend the life.
  • For long runs over 1,000 shirts – use Ecotex Emulsion Hardener to extend the life of your stencil.
  • To ensure best results, date your emulsion once mixed and keep an extra container on hand once the emulsion is about to expire*

Shelf Life:
10-12 months


QUESTIONS & ANSWERS

Ask a Question
  • What is the functional difference in the HV version compared to the non HV version?

    Great question! HV - High Viscosity yields better coating, sharp edges, and has higher resolution.


Related Items


Customer Reviews

5 Based on 5 reviews
5 ★
100% 
5
4 ★
0% 
0
3 ★
0% 
0
2 ★
0% 
0
1 ★
0% 
0
Write a Review
  • Reviews

Thank you for submitting a review!

Your input is very much appreciated. Share it with your friends so they can enjoy it too!

SF
02/18/2019
shizz fondoo

Dry It thoroughly

works well, took me some time to really dial it in but once I did, works like a charm

AR
01/11/2019
Alli Rhodes

Does the job

Great stuff a little rough when reclaiming but does it’s job I will continue to order

K
12/14/2018
KH

Great Emulsion. Works Fine With LED.

This was my first time using high viscosity emulsion. It was a bit irritating at first because I didn't realize just how quickly it starts to dry out. However, once I got used to it, no issues at all. So far, the exposure time with my 50W(350W equivalent) LED seems to be between 25-30 minutes with the bulb 12-14 inches from the screen. The one real complaint I have is that the instructions on the container say to pry the lid off with a coin. I quickly discovered this to be quite difficult and frustrating. Use a flathead screwdriver instead ;)

J
10/29/2018
Jessie

Product works great

good product!!

J
10/04/2018
jerrybear1969

Description was accurate & fast shipping!