Water Based Discharge Ink is a ready to use discharge ink. This ink can be used directly from the container as a water-base ink or with the Discharge-Powder. The inks are bright, vivid and can be mixed together to create all colors in the pantone book. WB Discharge Ink can be printed on high mesh counts and produces very fine image detail. Our ink can be used with other inks to create multiple effects.
FREE CMS - Color Matching System Program:
Flash and Curing Guidelines
Flash forced air flash is optimal. Curing should be a minimum of 90 seconds at 320F. For the best results 2-3 minutes at 300-320F.
Helpful Hints for Optimal Use:
Activate just enough ink for the job at hand
Mist the screen with water during high volume runs to prevent the ink from drying out
Recommended Clean Up:
Water Based Screen Cleaner
Be the first to ask a question about this.