Water Based Discharge Ink is a ready to use ink. It can not be used a discharge ink. WB Ink produces very fine image detail and can be printed on high mesh counts. Our ink can be used with other inks to create multiple effects.
Flash and Curing Guidelines: Flash forced air flash is optimal. Curing should be a minimum of 90 seconds at 320F. For the best results 2-3 minutes at 320F.
Mesh Guidelines: 160-305
For Optimal Use:
· Mist the screen with water during high volume runs to prevent the ink from drying out
Emulsion Recommendations: We recommend using a water resistant emulsion such as WR-Blue or DC-Pink, both require mixing diazo. Remember to degrease your screen before coating emulsion, Hyper Haze will degrease and remove stains/ghosts.
General Testing: Before you do any large print, we recommend doing a stretch and a wash test to ensure you cured and printed correctly before going into production. Increase cure time if testing fails. We recommend only using natural fibers; best results will be seen on 100% cotton. Synthetic fibers will not discharge properly.
Color Matching Info: Some colors do not discharge as well as others ex. are red, blue & purples. Color matching may not be exact. Roughly 90% of our colors match, matches cannot be guaranteed due to the differences in how fabrics are dyed.