Key Benefits:
- Cures At 270° F
- Soft Hand Prints
-
Bold & Vibrant Colors
- Universal For Variety Of Fabrics
- Low Bleed For Poly Blends
- Non-Phthalate
- Highly Opaque
- Short Body
- Semi-Gloss
Rapid Cure “Flo Blue” Fluorescent Screen Printing Plastisol Ink by Screen Print Direct® is a premium plastisol ink that cures as low as 270°. Rapid Cure Plastisol Ink is the best plastisol ink for screen printing when working with a variety of materials. This low bleed fluorescent plastisol ink works great with a wide variety of blends including polyester. Say goodbye to garment shrinking and scorching with low-temperature cure fabric ink. The ink's lower cure temp saves production time and helps ensure the garment is cured properly without expensive conveyor dryers. The ink's texture is creamy and short-bodied. The color is vibrant, bold, and opaque. For darker garments, we recommend printing with an under-base.
Disclaimer: All colors are approximate and will vary from monitor to monitor.
For more information on low-temperature cure inks take a look at the blogs we have below.
Disclaimer: We do not recommend printing fluorescent colors on dark garments. If you are printing on a dark garment an under-base is a must.
Curing Temp:
- Cure at 160°C /320°F
- Flash at 105°C/220°F - 7 - 12 seconds
Clean-Up:
Flash and Curing Guidelines: Generally it will take 5-10 washes to fully test the cure, but if the ink is seriously under-cured, the print will show deterioration after only 1-3 washings washes. Another way to test your print quickly is doing the “Stretch Test” stretch the print roughly 2/3 of the T-Shirt; if the print cracks and does not retract back it means you under-cured.
General Testing: Before you do any large print, we recommend doing a stretch test and a wash test to ensure you are cured and printed correctly before going into production. Increase cure time if testing fails. We recommend only using natural fibers best results will be seen on 100% cotton.
✔️Pro Tips: Plastisol inks do not dye fabric like the traditional inks. Plastisol inks wrap around the fibers and make a mechanical bond with the fabric. Store plastisol inks at room temperature. Prolonged exposure to temperatures above 90º F (32º C) can cause the ink to start to cure while it's still in the container.
We highly recommend printing with an under base white when printing on a dark garment
Click Here For Safety Data Sheet
Click Here for Rapid Cure Color Guide and Hex Codes
$75+ Ships Free*