Ecotex® Red Textile Emulsion by Screen Print Direct® is a pre-sensitized, fast exposing emulsion formulated for plastisol ink systems. Tex-Red Emulsion is a ready-to-use emulsion that works great with a variety of light sources making it very easy to work with for any level of printer.
- Works with plastisol ink systems
- Pre-sensitized emulsion
- Easy to work with for all printers
- Virtually pinhole free
- Diazo not required
- 12-month shelf life
Emulsions can be tricky and if you still need help trying to find out which is right for you take a look at our emulsion guide - Which emulsion to use?
Application: Apply Tex Red Emulsion to a clean, degreased, and dry screen with a scoop coater. Be sure to use appropriate application techniques. It’s recommended you eliminate any UV light from entering the room and work under a yellow light.
Exposure times may vary, start using the times provided below and make adjustments to time if needed. Add an exposure calculator to help dial in exposure times.
- 10 - 12 seconds with LED Light
- 6.5 - 7 minutes with 500w Halogen Light
- 86 ° to 104 °F (30 ° to 40 °C)
- 30% to 50% humidity
- Good Air Circulation
Shelf Life & Storage:
- 12 months if not exposed to extreme weather conditions or exposed to light
- Mixed with diazo for water-based Inks: 1 week
- Prep your screen before coating with Ecotex® Hyper Haze
- Eliminate any UV light from entering the room and work under a yellow light.
- Use the sharp edge of your scoop coater
- Make sure the screen is completely dry before coating the emulsion
- Make sure emulsion is completely dry before printing
- Keep the emulsion lid on tight to preserve air and light leaks
- Gently mix the emulsion each time before use to help extend the life
- Write down the day you opened the emulsion on the bottle to better keep track of your chemicals.
- Keep in a cool area, the emulsion will break down much faster in heat. Keeping emulsion in a fridge can help to give a slightly extended shelf life, however, emulsion that has gotten to the point of freezing will no longer work properly and must be replaced
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
I got a quart of this emulsion to test out and i have to say that this was the best emulsion ive used as of yet. I use an LED exposure unit and brought my exoposure times from 25 sec. to 15 sec. And washes out great without having to uses too much water pressure. Will defenatly be purchasing again, a gallon this time.
awesome. Great to use
Excellent. Easy to use. Gave great details. 30 seconds to perfect
Love it, have gone through a couple tubs so far. I use UV light exposure unit and run it for 14.5 minutes with this emulsion. Washes out great, I have used it on print runs up around 100 units with no problems.