Ecotex® Water Based Screen Printing Ink Snow White

Key Benefits:

• Ready To Use 
• Super Soft Hand Feel 
• Eco-friendly: PVC & Phthalate Free
• Bright & Crisp Color 
• High Opacity
• Low Odor
• Iron Resistant
• Cures at 320°

Ecotex® Water-Based Screen Printing Ink Snow White by Screen Print Direct® is a stand alone white water-based screen printing ink that is ready from the container and cannot be discharged. Snow white is bright and vivid. Water Based Ink produces very fine image detail, a soft hand, and can be printed on high mesh counts. Our ink can be used with other inks to create multiple effects. 

For Ecotex Water-Based Ink Hex Codes and Digital Swatches Click here

For more information on water-based inks follow along in our - Water Based Printing blog. 

Mesh Guidelines: 155-305

Flash and Curing Guidelines:

• Curing should be a minimum of 90 seconds at 320°F. For the best results 2-3 minutes at 320°F.
• Flash at 105°C/220°F - 7 - 12 seconds

Recommended Clean Up:

• On the press/in the sink - Ecotex® Water Based Screen Printing Press Wash

For Optimal Use:

• Mist the screen with water during high volume runs to prevent the ink from drying out

Emulsion Recommendations: We recommend using a water-resistant emulsion such as WR-Blue or DC-Pink, both require mixing diazo. Remember to degrease your screen before coating emulsion, Hyper Haze will degrease and remove stains/ghosts.

General Testing: Before you do any large print, we recommend doing a stretch and a wash test to ensure you are cured and printed correctly before going into production. Increase cure time if testing fails. We recommend only using natural fibers; best results will be seen on 100% cotton. Synthetic fibers will not discharge properly.