Ecotex® WR Liquid Tape - Water Resistant Block Out

For Use With:

• Water-Based Inks
• Discharge

Key Benefits:

• Fast Drying 
• Non Hazardous
• Fills Open Areas
• Good For Long Print Runs
• Simple & Easy To Use

Ecotex® WR Liquid Tape – Water Resistant Block Out by Screen Print Direct® is the ultimate screen block out. This fast drying formula is durable and high abrasion resistant. It's designed to fill open areas of the screen not covered by the emulsion. It is ideal for water based screen printing and discharge printing. 

Want to learn more about our liquid tape? Go ahead and read our blog on - Liquid Tape 

Shelf Life:
+12 months

For best results follow the steps below:

1.  When the screen is dry and free of contaminants, put the block out on the print  side of the screen and spread it over the open areas until it is completely filled.
2.  Touch up the defects. This includes blobs of product which tend to dry outside and pop off or smear during printing. When very fine meshes are used you can reduce the viscosity by adding a little bit of water.

1. Emulsion Remover and a pressure washer. Do not leave emulsion remover on for longer than 1 minute, it will harden the product.
2. Hyper Haze (degreaser and ghost remover) and a pressure washer. This product can be left overnight in order to soften the product for removal with the pressure washer