Ecotex® Screen Printing Discharge Activator - For Water Based Ink

Ecotex® Screen Printing Discharge Activator by Screen Print Direct® is used to activate water-based inks to discharge.

Stir in 3-5% depending on weight and mix well. Different percentages of the activator will affect the discharge results; increase or decrease depending on desired results. Mix only enough for current production requirements. Activated ink should be used within 8 hours.

Curious about discharge printing? Want to see what the results look like? Visit our blog - What Is Discharge Printing

FREE CMS - Color Mixing System Program to be used with our Water Based Discharge Ink 

For best results follow the steps below.

Mixing Information:

• Water-based printing: Our ink can be used straight out of the bottle as a traditional water-based ink. We recommend only doing this technique on light color garments.
• Discharge Printing: This ink can also be used as a discharge ink by adding the discharge powder. When using as a discharge ink, add enough discharge powder to the amount of ink you need for the print run. This will be somewhere in between 3-5% by weight. Mix thoroughly to make sure no chunks or grains are visible. Once the powder is added to the ink it will last for 8 hours.
• Activate just enough ink for the job at hand.

Recommended Clean Up:

Ecotex® Water Based Screen Printing Press Wash