Ecotex® Screen Printing Water Based Chemistry Kit

Includes:

• Water-Based Press Wash
• Hyper Haze 2 N 1 Degreaser and Dehazer
• Emulsion Remover
• Premium Hand Cleaner
• Scrub Pad
• Spray Nozzles

Ecotex® Screen Printing Water-Based Chemistry Kit by Screen Print Direct® is an essential kit for water-based ink screen printing. Easy to use and the perfect kit to help get you started. Ecotex® screen reclaiming kit is the perfect kit with everything you need when it comes to reclaiming screens. Cleaning screen printing screens has never been easier with water-based ink cleaners and emulsion remover. Our kit includes 1 pint of Water-Based Press Wash, 1 pint of Hyper Haze, 1 pint of Emulsion Remover, 4 oz. of Premium Hand Cleaner for silk screen cleaner, and 2 spray nozzles.

Ecotex® Water-Based Press Wash

Citrus Based environmentally friendly Screen Wash / Press Wash. Use it at the sink or on the press, designed specifically to quickly dissolve Water-Based inks. This product is ready to use, emulsion, and capillary stencil safe.

Ecotex® Hyper Haze

Economically and safely remove stains from all types of mesh better than other hazardous paste stain removers. Contains proprietary mesh protectors and micro-particles that will prepare new mesh for production.

To learn more about this product check out our blog post  - To Degrease or Not Degrease

Ecotex® Screen Printing Emulsion Remover

This product is ready to use or it can be diluted 1:4 with water. Ecotex® Emulsion Remover will economically and safely remove all types of photopolymer, diazo, and capillary film emulsions without etching. Reclaiming emulsion is easy.

Ecotex® Premium Hand Cleaner

Inks, Grease, & Much More are no match for our hand cleaner. Our organic-based, non-toxic hand cleaner was designed to be used with or without water. This product does not leave your hands dry or with an annoying sticky film after using it. 

For best results follow the steps below:

1. Start by using Ap 2-in-1 to degrease and clean any contaminants from the mesh.

2. When finished printing card excess ink away and use press wash to clean the ink off the screen.

3. To reclaim your screen spray Emulsion Remover to both sides of your screen and it will strip off once rinsed with high-pressure water.

Disclaimer: Do not let emulsion remover sit on the screen for more than 30 seconds or it can lock emulsion on the mesh.

Quick Tip:

For more information regarding each specific product please refer to the individual product listing