Rapid Cure Fluorescent Orange Screen Printing Plastisol Ink

Key Benefits:

• Cures At 270° F
• Soft Hand Prints
• Bold & Vibrant Colors
• Universal For Variety Of Fabrics
• Low Bleed For Poly Blends
• Non-Phthalate
  
• Highly Opaque
• Short Body
• Semi-Gloss

For more information on low-temperature cure inks take a look at the blogs we have below.

Disclaimer: We do not recommend printing fluorescent colors on dark garments. If you are printing on a dark garment an under-base is a must. 

Curing Temp:

• Cure at 160°C /320°F
• Flash at 105°C/220°F - 7 - 12 seconds

Clean-Up:

• On the press - Ecotex® Screen Printing Plastisol Press Wash/Ink Degradant
• In the sink - Ecotex® Screen Printing Plastisol Screen Wash/Ink Degradant

Flash and Curing Guidelines: Generally it will take 5-10 washes to fully test the cure, but if the ink is seriously under-cured, the print will show deterioration after only 1-3 washings washes. Another way to test your print quickly is doing the “Stretch Test” stretch the print roughly 2/3 of the T-Shirt; if the print cracks and does not retract back it means you under-cured.

General Testing:  Before you do any large print, we recommend doing a stretch test and a wash test to ensure you cured and printed correctly before going into production. Increase cure time if testing fails. We recommend only using natural fibers best results will be seen on 100% cotton.

✔️Pro Tips: Plastisol inks do not dye fabric like the traditional inks. Plastisol inks wrap around the fibers and make a mechanical bond with the fabric. Store plastisol inks at room temperature. Prolonged exposure to temperatures above 90º F (32º C) can cause the ink to start to cure while it's still in the container.

We highly recommend printing with an under base white when printing on a dark garment

Click Here For Safety Data Sheet

Click Here for Rapid Cure Color Guide and Hex Codes