Includes:
- Screen Printing Plastisol Press Wash
- Hyper Haze 2-N-1 Screen Printing Degreaser/Dehazer
- Screen Printing Emulsion Remover
- Premium Hand Cleaner
- Screen Printing Scrub Pad 3500
- Spray Nozzles
Ecotex® Screen Printing Plastisol Chemistry Kit by Screen Print Direct® is an essential screen reclaiming kit for plastisol ink screen printing. Easy to use and the perfect screen printing kit to help get you started. Cleaning screen printing screens has never been easier with plastisol ink cleaners and emulsion remover. Our kit includes 1 pint of Plastisol Press Wash, 1 pint of Hyper Haze, 1 pint of Emulsion Remover, and 4 oz. of Premium Hand Cleaner for silk screen cleaner.
Ecotex® Screen Printing Plastisol Press Wash
Citrus Based environmentally friendly Press Wash. Use it at the sink or on the press, designed specifically to quickly dissolve plastisol and UV inks. This product is ready to use, emulsion, and capillary stencil safe.
Don't know which product you need? Read the blog to help you make the right choice on Press Wash or Screen Wash - Press Wash vs Screen Wash
Ecotex® Hyper Haze Screen Printing Degreaser/Dehazer
Economically and safely remove stains from all types of mesh better than other hazardous paste stain removers. Contains proprietary mesh protectors and micro-particles that will prepare new mesh for production.
To learn more about this product check out our blog post - To Degrease or Not Degrease
Ecotex® Screen Printing Emulsion Remover
This product is ready to use or it can be diluted 1:4 with water. Ecotex® emulsion remover will economically and safely remove all types of photopolymer, diazo, and capillary film emulsions without etching. Reclaiming emulsion is easy, try our Ecotex® emulsion remover today.
Ecotex® Premium Hand Cleaner
Inks, grease, & much more are no match for our hand cleaner. Our organic-based, non-toxic hand cleaner was designed to be used with or without water. This product does not leave your hands dry or with an annoying sticky film after using it.
For best results follow the steps below.
1. Start by using Ap 2 in 1 to degrease and clean any contaminants from the mesh.
2. When finished printing card excess ink away and use press wash to clean the ink off the screen.
3. To reclaim your screen spray Emulsion Remover to both sides of your screen and it will strip off once rinsed with high-pressure water.
Disclaimer: Do not let emulsion remover sit on the screen for more than 30 seconds or it can lock emulsion on the mesh.
Quick Tip:
For more information regarding each specific product please refer to the individual product listing.
Click Here For Emulsion Remover Safety Data Sheet
Click Here For Plastisol Press Wash Safety Data Sheet
Click Here For Hand Cleaner Safety Data Sheet
Click Here For Ecotex® Hyper Haze Safety Data Sheet
United States